|
Wall Connecting Block
The series C 2211 / C 2212 chlorinators has been designed
so that they can be connected direcly to the chlorine
cylinder valve.
The advantage is that the chlorine gas under pressure
in the cylinder is transferred into the safe vacuum
without the intermediary of flexible metal lines which
might break.
If for important reasons - or as a replacement for an
existing wall-mounted chlorinator - a C 2211 / C 2212
unit is to be wall-mounted, this can easily be achieved
by fitting the wall connection block.
The connection block is fixed to the wall and has a
projecting threaded pin which matches the connection
of the standard chlorine cylinders.
The vacuum regulator can then be connected directly
to this threaded pin. A flexible copper is routed directly
from the chlorine cylinder or from a manifold of several
cylinders to the connection block, which is fitted with
a suitable cutting ring pipe connection.
|
