Measuring & Control Equipment

SR400/ SR500
- EasyPool
- Potentiostat
- Easypool Smart
- DCM01

TOPAX® Controllers
TOPAX® MV 450
TOPAX® DE1
TOPAX® DE2
TOPAX® DE3
TOPAX® DE4
TOPAX® DE5
TOPAX® DE6

TOPAX® L1
TOPAX® L2
TOPAX® L3
TOPAX® L4

TOPAX® LF1
TOPAX® LF2

TOPAX® DX
TOPAX® N

Swimming Pool Photometer

Accessories
Level Electrodes
Pressure Switch
Electrodes for pH/Redox
Conductivity Measuring Cells
Chlroine Sensors
Chlroine Measuring Cells
Chlroine Sensor GCM
Thyristor Governor TR710
Level Relay
Dotted Line Printer
Interface RS485
External Vent
Water Sampling Station
Control Panel
Software

 

 

DCM 01 Chlorine Sampling Station

Catalogue
Drawing Dimensions
Instruction Manual

For swimming pool water chlorine in different types of use is the predominant disinfectant. JESCO has been offering the technology for continuous measurement and control of the chlorine surplus (=free chlorine: HOCl) successfully for many years. By the oxidation of organic impurities chloramines are formed (= combined chlorine: mono, di and trichloramine). Free chlorine and combined chlorine summed up result in the total chlorine amount.

The German standard DIN 19643-1 prescribes the limiting values for the concentration of free and combined chlorine in the water. It must be ensured constantly that these values are kept to and that the pool staff checks and records them daily when opening the pool, at lunchtime and before closing it. During the past years the demand for an automatic measurement / control of the combined chlorine concentration has been steadily increasing.

According to the specialists, chloramines are considered to be damaging to health. Therefore the reduction of chloramines by means of appropriate measuring and control equipment should be aimed at (see also metering of activated-carbon powder - JESCO AKODOS).

As today online recording and display of the free chlorine concentration is standard and required, in the future this will also be the case for combined chlorine.