Measuring & Control Equipment

SR400/ SR500
- EasyPool
- Potentiostat
- Easypool Smart
- DCM01

TOPAX® Controllers
TOPAX® MV 450
TOPAX® DE1
TOPAX® DE2
TOPAX® DE3
TOPAX® DE4
TOPAX® DE5
TOPAX® DE6

TOPAX® L1
TOPAX® L2
TOPAX® L3
TOPAX® L4

TOPAX® LF1
TOPAX® LF2

TOPAX® DX
TOPAX® N

Swimming Pool Photometer

Accessories
Level Electrodes
Pressure Switch
Electrodes for pH/Redox
Conductivity Measuring Cells
Chlroine Sensors
Chlroine Measuring Cells
Chlroine Sensor GCM
Thyristor Governor TR710
Level Relay
Dotted Line Printer
Interface RS485
External Vent
Water Sampling Station
Control Panel
Software

 

 

Easypool Smart - Water Sampling & Dosing Station

Catalogue
Drawing Dimensions
Instruction Manual

Swimming pool water is predominantly disinfected by using chlorine in its various chemical compositions. The water sampling station
"EASYPOOL Smart" was developed for private swimming pools - dosing of the disinfectant is done in dependence of the REDOX value. It is used to monitor the hygienic parameters and to ensure the dosing of the corresponding chemicals.

Disinfection with active oxygen
A number of products which liberate active oxygen and therefore have a disinfectant effect have become established for chlorine-free disinfection. The advantage of products based on active oxygen is
that they do not produce any noxious smells, an advantage which is most evident in indoor swimming pools. The disinfecting potential of these products is lower than that of chlorine, for example. The
reaction time is considerably longer, but this is not a disadvantage in the private sector, due to the hygiene conditions normally prevailing there.

Concomitant use of an algicide is always recommended on account of the slight depot effect. All products and forms supplied are readily soluble. These products are dosed over time in accordance
with the size of the swimming pool.